Plumbers install, repair and maintain the water supply, waste water treatment, drainage and gas systems in homes, commercial and industrial buildings. The work includes plumbing tasks to assemble, install and repair pipes, fittings, and fixtures of heating, water and drainage systems according to specifications and plumbing codes.

The Technical Plumbing Apprenticeship program is five years in length, with a minimum of 8,000 hours. This includes 572 hours of paid related instruction and 260 hours of unpaid instruction, plus an 8 hour Plumbing Prep Test-Out Exam or a 54 hour Plumbing Code Review Course.

  • Overview
  • Included in the 572 hours of day school and 260 hours of night school Plumbing Apprenticeship training:

    • OSHA 30-hour Safety Training
    • Water distribution
    • Cross connection control
    • Sanitary drains
    • Vents and venting
    • Private onsite wastewater treatment systems
    • Green plumbing
    • Solar hot water
    • Water reuse
    • Storm water
    • State of Wisconsin Department of Safety and Professional Services Administrative Code

    Term of Apprenticeship

    The Technical Plumbing Apprenticeship program is five years in length, with a minimum of 8,000 hours. This includes 572 hours of paid related instruction and 260 hours of unpaid instruction, plus an 8 hour Plumbing Prep Test-Out Exam or a 54 hour Plumbing Code Review Course.

  • Curriculum & Costs
  • Requirements
  • Minimum Requirements

    The apprenticeship applicant must complete the following to be considered a qualified applicant:

    1. Complete Apprentice Application *
    2. Provide a copy of your High School transcripts or GED
    3. Prove you have a valid driver's license
    4. Take the Next-Generation Reading and Arithmetic assessment test. The applicant must have the following minimum scores in each area: Arithmetic = 237 and Reading = 239. Please call 608.822.2313 or 800.362.3322 ext. 2313 to schedule an appointment for testing which is located in the Knox Learning Center. ACT scores within the past five years of the test date can be used in lieu of the Reading and Arithmetic assessment test (minimum ACT standards of 15 in Math and 16 in Reading required).
    5. Complete Employer Application *
    6. Admissions Meeting: After applying and submitting transcripts, work with the program dean to begin or continue your student success plan to talk about your career interests and goals, develop a plan for paying for college, learn about various funding options, create an academic map, and discuss supports and services. Schedule an admissions meeting by contacting the program dean.
    If you are unable to access documents here, please contact Academic Services (academicservices@swtc.edu, 608.822.2617)

    High School Seniors: Apply in your last semester if you meet all other qualifications. Submit a letter from your high school counselor stating you will graduate at the end of the academic year.

    * The deadline for submitting the Apprentice Application and Employer Application is July 20. Not adhering to this deadline, could restrict starting the apprenticeship program.

    No one will be considered a qualified applicant until all of the above requirements have been met.

    Please submit the information listed above to:

    Nicole Nelson
    Southwest Tech
    1800 Bronson Blvd.
    Fennimore, WI 53809
    608.822.2400
    nnelson@swtc.edu
    fax: 608.822.2675

    You will be given a letter of introduction to give to prospective employers after all the minimum qualifications have been met. If you find an employer willing to hire you as an apprentice, contact Nicole Nelson at Southwest Tech 608.822.2400. Nicole will provide you with information on procedures to be followed by you and your employer.

    Program Fees

    • NOTE: This program is not eligible for financial aid. However, many apprenticeship employers pay for their Apprentice's tuition and fees.
    • Estimated cost for each semester can be found under the Curriculum tab. Please note that costs are approximate and are based on the current academic year.
    • Please discuss additional fee questions with the program advisor or instructor.

    Additional requirements

    Students must have eye wear protection (safety glasses with side shields or wrap around safety glasses over prescription glasses) and must meet OSHA Z87.1 or greater while they are conducting operations that are deemed hazardous in nature. These glasses can be purchased at the College Bookstore.

  • Outcomes
  • A student successfully completing this program will be able to do the following:

    • Assemble pipe sections, tubing and fittings, using couplings, hangers, cement, and plastic solvent, soldering, brazing and welding equipment.
    • Cut openings in structures to accommodate pipes and pipe fittings, using hand and power tools.
    • Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.
    • Hang steel supports from ceiling joists to hold pipes in place.
    • Install pipe assemblies, fitting, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools.
    • Install underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems.
    • Repair and maintain plumbing, replace defective washers, replace or mend broken pipes, and opening clogged drains.
    • Interpret building plans and inspect structures to assess material and equipment needs.
    • Determine the material, methods, and tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
    • Maintain a working knowledge of machines and tools, including their designs, uses and repairs.
    • Maintain a working knowledge of blueprint reading, the plumbing code, math and theory.
    • Must be able to understand detailed written and verbal communication.